• Home
• Courses
• Laboratory 
• Publications
• Presentations   
• Research Projects   
• Professional and Service
• Student Advising
• Synergistic Activities    
• Technical Reports

JOURNAL PUBLICATIONS FROM ASU

1. Waleed Zeiada, Abdulaziz Alossta; Kamil Kaloush "Laboratory Evaluation of Foaming-Based and Chemical-Based Warm Mix Asphalt". Innovative Infrastructure Solutions, Springer Journals.

2. Luiz Guilherme R. Mello, Marcio Muniz De Farias, Kamil E. Kaloush, "Effect of Temperature on Fatigue Tests Parameters for Conventional and Asphalt Rubber Mixes", Road Materials and Pavement Design. December 2016.

3. Jiachuan Yang*, Zhi-Hua Wang, Kamil E. Kaloush, Heather Dylla. “Effect of Pavement Thermal Properties on Mitigating Urban Heat Islands: A Multi-scale Modeling Case Study in Phoenix”. Building and Environment, Volume 108, 110-121, Elsavier publications. 2016 (+)

4. Stempihar, Jeffrey (X)*; Kaloush, Kamil. "Development of the C* Fracture Test for Asphalt Concrete Mixtures". ASTM Journal of Testing and Evaluation (under review Feb 2016). (+)

5. Waleed Abdelaziz Zeiada (X)*, Kamil E. Kaloush, B. Shane Underwood, Michael Mamlouk, “Development of Test Protocol to Measure Axial Fatigue Damage and Healing”. Journal of Transportation Research Board, Washington, D. C. (2016) (+)

6. Veena Venudharan (8), Anush Chandrappa (8); Krishna Prapoorna Biligiri*(X), Kamil E. Kaloush, “Predictive Models for Storage Modulus (E') and Loss Modulus (E") of Asphalt Mixtures”, ASCE Journal of Materials in Civil Engineering, American Society of Civil Engineers. (in Press 2016; DOI: 10.1061/(ASCE)MT.1943-5533.0001550) (+)

7. Waleed A. Zeiada (X)*, B. Shane Underwood, and Kamil Kaloush. "Impact of Asphalt Concrete Fatigue Endurance Limit Definition on Pavement Performance Prediction", International Journal of Pavement Engineering (accepted Nov 2015, GPAV-2015-0123.R2, DOI:10.1080/10298436.2015.1127372). 2016. (+)

8. Patrick E. Phelan*, Kamil E. Kaloush, Mark Miner, Jay Golden, Bernadette Phelan, Humberto Silva, Robert A Taylor, “Urban Heat Island: Mechanisms, Implications, and Possible Remedies”. Annual Review Environmental Resources, Volume 40, 285—307, 2015. (+)

9. Jiachuan Yang, Zhi-Hua Wang*, Kamil E. Kaloush “Environmental Impacts of Reflective Materials: Is High Albedo a 'Silver Bullet' for Mitigating Urban Heat Island?” Renewable & Sustainable Energy Reviews, 47, 830–84, Elsevier publications. 2015. (+)

10. Mena I. Souliman*, Michael Mamlouk, Kamil E. Kaloush "Preliminary Prediction of Endurance Limit for Asphalt Rubber Mixtures Due To Healing", Canadian Journal of Civil Engineering, 41(11): 964-969, 10.1139/cjce-2013-0505, 2014. (+)

11. Waleed Zeiada (X), Shane Underwood, Tina Pourshams, Jeffrey Stempihar (X) and Kamil Kaloush*, “Comparison of Conventional, Polymer, and Rubber Asphalt Mixtures Using Viscoelastic Continuum Damage Model”. Road Materials and Pavements Design Journal, Taylor and Francis online, Volume 15, Issue 3, pages 588-605, 2014. (+)

12. Kamil Elias Kaloush*. “Asphalt Rubber: Performance Tests and Pavement Design Issues”. Journal of Construction and Building Materials, 67 (2014) 258–264, Elsevier publications, March 2014.

13. Krishna Prapoorna Biligiri * and Kamil Elias Kaloush. “Effect of specimen geometries on asphalt mixtures' phase angle characteristics”. Journal of Construction and Building Materials, 67 (2014) 249–257, Elsevier publications, March 2014. (+)

14. Waleed Abdelaziz Zeiada*, Mena I. Souliman, Kamil E. Kaloush, Michael S. Mamlouk, Shane Underwood, “Comparison of Fatigue Damage, Healing, and Endurance Limit using Beam and Uniaxial Fatigue Tests”. Journal of Transportation Research Board, Volume 2447, Issue 1, pages 32-41, Washington, D. C. 2014. (+)

15. Waleed Zeiada, Mena Souliman*, Kamil Kaloush, Michael Mamlouk. “Endurance Limit for HMA Based on Healing Concept Using Uniaxial Fatigue Test”. ASCE Journal of Materials in Civil Engineering. Volume 26, Issue 8, ISSN 0899-1561/(0), 2013. (+)

16. Zeiada, W.A.*, K.E. Kaloush, S.B. Underwood, and M.S. Mamlouk. “Improved Method to Consider Air Void and Asphalt Content Changes on Long-Term Performance of Asphalt Concrete Pavements,” International Journal of Pavement Engineering (IJPE), 2013. Volume 15, Issue 8, 2013, pp. 718-730. (+)

17. Mena Souliman, Waleed Zeiada, Michael Mamlouk* and Kamil Kaloush, “Fatigue Endurance Limit for HMA Based on Healing”. Journal of the Association of Asphalt Paving Technologists, Volume 82, p503-531, Lino Lakes, MN, 2013. (+)

18. Maria Carolina Rodezno* and Kamil Elias Kaloush. “Development and Validation of a Rutting Model for Asphalt Mixtures Based on the Flow Number Test”. Journal of the Association of Asphalt Paving Technologists, Volume 82, p557-578, Lino Lakes, MN, 2013. (+)

19. Mena Souliman*, Waleed Zeiada, Michael Mamlouk and Kamil Kaloush. “Laboratory Validation of Healing-based Fatigue Endurance Limit for HMA”. Journal of Transportation Research Board, Washington, D. C. 2013. (+)

20. Michael Mamlouk*, Mena Souliman, Waleed Zeiada, Kamil Kaloush. “Refining Conditions of Fatigue Testing of Hot Mix Asphalt”. ASTM, Advances in Civil Engineering Materials. Volume 1, Issue 1, November 2012. (Mamlouk 50%, Souliman 15%, Zeiada 15%, Kaloush 20%).

21. Jeffrey J. Stempihar, Tina Pourshams-Manzouri, Kamil E. Kaloush*, and Maria Carolina Rodezno. “Porous Asphalt Pavement Temperature Effects for Urban Heat Island Analysis”. Journal of Transportation Research Board, No. 2293, Volume 1, p123-130, Washington, D. C. 2012. (+)

22. Jeffrey J. Stempihar*, Mena I. Souliman, and Kamil E. Kaloush. “Use of Fiber Reinforced Asphalt Concrete as a Sustainable Paving Material for Airfields”. Journal of Transportation Research Board, No. 2266, p60-68, Washington, D. C. 2012. (Stempihar 50%, Souliman 10%, Kaloush 40%).

23. Maria Carolina Rodezno* and Kamil E. Kaloush, "Guide on the Selection of Appropriate Laboratory Stress Levels for the Flow Number Test". ASTM Journal of Testing and Evaluation, Vol. 39, No. 6, 2011. (+)

24. Alexander Zborowski and Kamil E. Kaloush*, “A Fracture Energy Approach to Model the Thermal Cracking Performance of Asphalt Rubber Mixtures”. Road Materials and Pavements Design Journal, Volume 12 Issue 2, pp 377-395, Lavoisier, 2011. (+)

25. Maria Carolina Rodezno and Kamil E. Kaloush*, “Implementation of Asphalt-Rubber Mixes into the Mechanistic Empirical Pavement Design Guide”. Road Materials and Pavements Design Journal, Volume 12 Issue 2/2011, pp 423-439, Lavoisier, 2011. (+)

26. Mena I. Souliman* and Kamil E. Kaloush, “Evaluation of Fatigue Criteria for Asphalt Pavements”. International Journal for Engineering Technology. Volume 11, Number 1, pp. 35-46, 2011. (+)

27. Mena I. Souliman* and Kamil E. Kaloush, “Assessment of the Extended Fatigue Life for Rubber and Polymer Modified Asphalt Mixtures Using Flexural Bending Beam Fatigue Test”. Jordan Journal of Civil Engineering, Volume 5, No. 2, pp 210-215, 2011. (Souliman 80%, Kaloush 20%).

28. Waleed Zeiada, Kamil E. Kaloush*, Krishna P. Biligiri, Jordan X. Reed, and Jeffrey Stempihar., “Significance of Confined Dynamic Modulus Laboratory Testing for Dense, Gap and Open Graded Asphalt Concrete Mixtures”, Journal of Transportation Research Board, No. 2210, p. 9-19, Washington, D. C. 2011. (Zeiada 30%, Kaloush 40%, Reed 10%, Stempihar 20%).

29. Belshe, M., Mamlouk, M.S.*, Kaloush, K.E., and Rodezno, M., “Temperature Gradient and Curling Stresses in Concrete Pavement with and without Open Graded Friction Course,” Vol. 137, No. 10, , pp 723-729, ASCE Journal of Transportation Engineering, 2011.

30. Philip White, Jay S. Golden*, Krishna P. Biligiri, and Kamil Kaloush, “Impacts of Alternative Pavement Designs on Climate Change”, Journal of Resources, Conservation and Recycling, Elsevier, the Netherlands, Volume 54, Issue 11, pp. 776-782, 2010. (+)

31. Luiz G. R. Mello*, Kamil E. Kaloush, and Márcio M. Farias. “Continuum Damage Theory Applied To Flexural Fatigue Tests on Conventional and Asphalt Rubber Hot Mixes”. Road Materials and Pavements Design Journal, Volume 11, No. 3/2010, pp. 681-700, Lavoisier 2010. (Mello 50%, Kaloush 40%, Farias 10%).

32. Mohammad Abojaradeh*, Basim Jrew, Fawzi Ghragheer, Kamil E. Kaloush, and Dua Abojaradeh. “Cracking Characteristic of Asphalt Rubber Mixtures”. Jordan Journal of Civil Engineering, Volume 4, No. 3, pp. 205-210. 2010. (+)

33. Kamil E. Kaloush*, Krishna P. Biligiri, Waleed Zeiada, Maria Rodezno, and Jordan Reed, “Evaluation of Fiber-Reinforced Asphalt Mixtures Using Advanced Material Characterization Tests”, Journal of Testing and Evaluation, ASTM International, Vol38, No.4, pp.400-411 2010. (+)

34. Joby D Carlson*, Rahul Bhardwaj, Patrick E Phelan, Kamil E Kaloush and Jay S Golden. “Determining Thermal Conductivity of Paving Materials Using Cylindrical Sample Geometry”. ASCE Journal of Materials in Civil Engineering, Volume 22, Issue 2, pp. 186-195, 2010. (+)

35. Krishna P. Biligiri*, Kamil E. Kaloush, and Jacob Uzan, “Evaluation of Asphalt Mixtures’ Viscoelastic Properties using Phase Angle Relationships”, International Journal of Pavement Engineering, Taylor & Francis, Volume 11, Issue 2, pp. 143-152, 2010. (+)

36. Maria Carolina Rodezno* and Kamil Elias Kaloush. “Effect of Different Dosages of Polypropylene Fibers in Thin Whitetopping Concrete Pavements”. American Concrete Institute Materials Journal, Volume 107, Issue 1, pp 42-47, 2010. (+)

37. Maria Carolina Rodezno*, Kamil E. Kaloush and Matthew R. Corrigan. “Development of a Flow Number Predictive Model”. Journal of the Transportation Research Board, TRR 2181, Volume 3, pp. 79-87, Washington, D.C., 2010. (+)

38. Krishna P. Biligiri* and Kamil E. Kaloush., “Prediction of Pavement Materials’ Impedance Using Ultrasonic Pulse Velocity”, Journal of Road Materials and Pavement Design, Hermes Science Publications, France, Volume 10, Issue 4, pp. 767-787, 2009. (+)

39. Atish A. Nadkarni*, Kamil E. Kaloush, Waleed A. Zeiada, Krishna P. Biligiri. “Using the Dynamic Modulus Test for Moisture Susceptibility Evaluation of Asphalt Mixtures”. Journal of the Transportation Research Board, TRR 2127, pp. 29-35, Washington, D. C., 2009. (Nadkarni 50%, Kaloush 30%, Zeiada 10%, Biligiri 10%).

40. Maria Carolina Rodezno* and Kamil E. Kaloush. “Comparison of Asphalt Rubber and Conventional Mixtures Properties and Considerations for MEPDG Implementation”. Journal of the Transportation Research Board, TRR 2126, Volume 1, pp. 132-141, Washington, D.C., 2009. (+)

41. Todd Otanicar*, Joby Carlson, Jay Golden, Kamil Kaloush and Patrick Phelan. “Impact of the Urban Heat Island on Light Duty Vehicle Emissions for the Phoenix, Arizona Area. International Journal of Sustainable Transportation, Taylor & Francis, pp 1-13, 2009. Otanicar 60%, Carlson 10%, Golden 10%, Kaloush 10%, Phelan 10%).

42. Joby Carlson, Kamil Kaloush*, Jay Golden, Mohamed Arab and Claudia Zapata, “Evaluation of in Situ Temperatures, Water Infiltration and Regional Feasibility of Pervious Concrete Pavements”. International Journal of Pavements, IJP 2008 Volume 7 Number 1-2-3, pp 96-108, 2008. (Carlson 40%, Kaloush 40%, Arab 10%, Zapata 10%).

43. Olga Alexandrova (X), Kamil E. Kaloush*, and Jonathan O. Allen, “Impact of Asphalt Rubber Friction Course Overlays on Tire Wear Emissions and Air Quality Models for Phoenix, Arizona Airshed”. Journal of the Transportation Research Board, No. 2011, pp 98-106. Washington, D.C., 2007. (Alexandrova 40%, Kaloush 40%, Allen 20%).

44. Aleksander Zborowski and Kamil Kaloush*, “Predictive Equations to Evaluate Thermal Fracture of Asphalt Rubber Mixtures”. International Journal of Road Materials and Pavement Design, Volume 8 Issue 4/2007, pp 819-833, Lavoisier, 2007. (+)

45. Jooseng (Gavin) Gui*, Joby Carlson, Patrick Phelan, Kamil Kaloush, and Jay Golden, “Impact of Pavement Thickness on Surface Diurnal Temperatures”. Journal of Green Building, Volume 2, No. 2, College Publishing, Glen Allen, Virginia, pp 121-130, 2007. (+)

46. Biligiri, K.*, Kaloush, K., Mamlouk, M., Witczak, M., “Rational Modeling of Tertiary Flow for Asphalt Mixtures”. Journal of the Transportation Research Board, No. 2001, pp 63-72. Washington, D.C., 2007. (+)

47. Jooseng Gui*, Patrick E Phelan, Kamil E Kaloush and Jay S Golden, “Impact of Pavement Thermophysical Properties on Surface Temperatures”. ASCE Journal of Materials in Civil Engineering, Vol. 19, No. 8, pp. 683-690, 2007. (+)

48. Jay S. Golden*, Joby Carlson, Kamil E. Kaloush and Patrick Phelan, “A Comparative Study of the Thermal and Radiative Impacts of Photovoltaic Canopies on Pavement Surface Temperatures”. Solar Energy, Volume 81, Issue 7, pp 872-883, 2007. (+)

49. M. A. Abojaradeh*, Matthew W. Witczak, Michael S. Mamlouk, and Kamil E. Kaloush, “Validation of Initial and Failure Stiffness Criteria in Flexible Fatigue Test for Hot Mix Asphalt”. ASTM Journal of Testing and Evaluation, Vol. 35, No. 1, pp. 95-102, 2007. (+)

50. Golden, J.S.* and Kaloush, K.E., “Mesoscale and Microscale Evaluation of Surface Pavement Impacts on the Urban Heat Island Effects”. International Journal of Pavement Engineering, Volume 7, No. 1, pp 37-52, Taylor & Francis, 2006. (+)

51. Golden, J.S.*, Guthrie, P.M., Kaloush, K.E., and Britter, R.B., “The Summertime Urban Heat Island Hysteresis Lag Complexity”, Sustainable Engineering, A Journal of the Royal Institute of Civil Engineers, Volume 158, No. ES4, pp 197-210, 2005. (+)

52. Rodezno, M.C.*, Kaloush, K., and Way, G., “Assessment of Distress in Conventional Hot-Mix Asphalt and Asphalt-Rubber Overlays on Portland Cement Concrete Pavements - Using the Mechanistic-Empirical Design of Pavement Structures”, Journal of the Transportation Research Board, No. 1929, pp 20-27, Washington, D.C., 2005. (Rodezno 40%, Kaloush 40%, Way 20%).

53. Kaloush, K.*, Way, G., and Zhu, H., “Properties of Crumb Rubber Concrete”, Journal of the Transportation Research Board, No. 1914, pp 8-14, Washington, D.C., 2005. (+)

54. Tashman, L.*, Masad, E., Zbib, H., Little, D., Kaloush, K.. "Microstructural Viscoplastic Continuum Model for Asphalt Concrete," ASCE Journal of Engineering Mechanics, Vol. 131, No.1, pp 48-57, 2005. (+)

55. Mamlouk, M.*, Witczak, M., Kaloush, K., Hasan, N., “Determination of Thermal Properties of Asphalt Mixtures.” ASTM Journal of Testing and Evaluation, Vol 33, No.2, pp 118-126, 2005. (+)

56. Sotil, A.*, Kaloush, K., and Witczak, M., “Reduced Confined Dynamic Modulus Testing Protocol for Asphalt Mixtures”, Transportation Research Record, Journal of the Transportation Research Board, No. 1891, pp 153-162, Washington, D.C., 2004. (+)

57. Tashman, E.*, Masad, E., Zbib, H., and Little, D., Kaloush, K. "Continuum Damage Model for Permanent Deformation of Asphalt Mixes," ASCE Geotechnical Special Publication No. 123, pp. 111-125, Recent Advances in Materials Characterization and Modeling of Pavement Systems, Reston, Virginia, 2004. (+)

58. Kaloush, K.* and Witczak, M.W., “Tertiary Flow Characteristics of Asphalt Mixtures”. Journal of the Association of Asphalt Paving Technologists, Volume 71, p248-280, St. Paul, MN, 2002. (+)

59. Witczak, M.W., Kaloush, K.* and Von Quintus. H. “Pursuit of the Simple Performance Test for Asphalt Mixture Rutting”. Journal of the Association of Asphalt Paving Technologists, Volume 71, p671-691, St. Paul, MN, 2002. (+)

60. Mamlouk, M.S.*, Witczak, M.W., Kaloush, K. and Yow-Shi Ho. “Effect of Anisotropy on Compressive and Tensile Properties of Asphalt Mixtures”. Journal of Testing and Evaluation, ASTM, p432-438, 2002. (+)

61. Kaloush, K.*, Mirza, M.W., Uzan, J. and Witczak, M.W., “Specimen Instrumentation Techniques for Permanent Deformation Testing of Asphalt Mixtures.” Journal of Testing and Evaluation, ASTM, p423-431, 2001. (+)

62. Witczak, M., Bonaquist, R., Von Quintus, H., and Kaloush, K.*, “Specimen Geometry and Aggregate Size Effects in Uniaxial Compression and Constant Height Shear Tests.” Journal of the Association of Asphalt Paving Technologists, Vol 69, p733-782, St. Paul, MN, 2000. (+)

JOURNAL PUBLICATIONS PRIOR TO ASU

63. Dudley, S. W., Majidzadeh, K., and Kaloush, K.*, "Cold, In-place, Asphalt Mix Recycling of Low Volume Roads in Ohio", Transportation Research Record 1106, p163-172, Transportation Research Board, Washington, D.C., 1987. (+)

64. Miller, K. M., Majidzadeh, K., and Kaloush, K.*, "Comparison of Concrete Pavement Rehabilitation Techniques in Ohio Demonstration Program", Transportation Research Record 1110, Transportation Research Board, Washington, D.C., 1987. (+)

PEER REVIEWED CONFERENCE PUBLICATIONS

65. Waleed Zeiada, Ruben Lolly, Kamil Kaloush. “Effects of Shor-Term Aging on Asphalt Binders and Hot Mix Asphalt at Elevated Temperatures and Extended Aging Time”. Advances in Sustainable Construction Materials & Civil Engineering Systems (ASCMCES-17), University of Sharjah, United Arab Emirates, 18-20 APRIL 2017.

66. Jeff Stempihar (X)*, B. Shane Underwood, Scott Nazar, Kamil Kaloush. “Durable Fiber Reinforced Asphalt Concrete Friction Courses for Airfield Runways”. Accepted ISAP Conference, July 18-21, 2016. (Stempihar 55%, Underwood 15%, Nazar 15%, Kaloush 15%).

67. Jiachuan Yang, Zhi-Hua Wang*, Kamil E. Kaloush, and Heather Dylla, “Effect of Pavement Types on Urban Thermal Environment”. 4th International Conference on Countermeasures to Urban Heat Island, National University of Singapore, Singapore, June 2016. (+)

68. Jeff Stempihar*, Waleed Zeiada, B. Shane Underwood, and Kamil Kaloush. “Laboratory Cracking Evaluation of a Warm Mix Rubber Modified Pavement”. Proceedings of the Asphalt Rubber 2015 Conference, ISBN: 978-989-20-5949-5, Las Vegas, USA, October 2015. (+)

69. George B. Way*, Krishna Biligiri, Kamil Kaloush, Jorge B. Sousa, Ângelo Pinto, Rongji Cao. “Rubberized Asphalt Open Graded Mix, International Experience”. Proceedings of the Asphalt Rubber 2015 Conference, ISBN: ISBN: 978-989-20-5949-5, Las Vegas, USA, October 2015. (+)

70. Mena I. Souliman*, Michael Mamlouk, Kamil E. Kaloush. “Endurance Limit for Asphalt Rubber Mixtures”. Proceedings of the Asphalt Rubber 2015 Conference, ISBN: ISBN: 978-989-20-5949-5, Las Vegas, USA, 4-7 October 2015. (+)

71. Jose Medina*, Kamil Kaloush, Shane Underwood. “Properties of Activated Crumb Rubber Modified Binders”. Proceedings of the Asphalt Rubber 2015 Conference, ISBN: ISBN: 978-989-20-5949-5, Las Vegas, USA, 4-7 October 2015. (+)

72. K E Kaloush*, B S Underwood, W A Zeiada, J Stempihar. “Fiber Reinforced Asphalt Concrete: Performance Tests and Pavement Design Consideration”, 6th International Conference Bituminous Mixtures & Pavements, 10-12 June 2015, Thessaloniki, Greece. (+)

73. G. B. Way*, K.E. Kaloush, K. P. Biligiri, J. Sousa, A. Pinto, R. Cao. “International Use of Rubberized Asphalt Open Graded Friction Course”, 6th International Conference Bituminous Mixtures & Pavements, 10-12 June 2015, Thessaloniki, Greece. (+)

74. Kamil E. Kaloush*, Shane Underwood, Waleed Zeiada, Jeffery Stempihar (X), “Fiber Reinforced Asphalt Concrete: Performance Tests and Pavement Design Consideration”. Proceedings of the 3rd MESAT Conference on Performance-Based Specifications and Design for Sustainable Asphalt Pavements in the Middle East April 6-8, 2015 American University in Dubai, UAE. (+)

75. Shane Underwood, Waleed A. Zeiada (X), and Kamil E. Kaloush, "Comparison of Hot Mix Asphalt Endurance Limit using NCHRP 9-44A Developed Methodology to Other Analytical Techniques" International Conference on Perpetual Pavement, October 30 -31, 2014 - Columbus, Ohio, USA. (+)

76. Kamil Kaloush, “Fiber Reinforced Asphalt Concrete: Performance Tests and Pavement Design Consideration”, 1st IRF Asia Regional Congress & Exhibition, October 27-29, 2014, Bali, Indonesia.

77. Waleed A. Zeiada*(X), B. Shane Underwood, and Kamil E. Kaloush, “Uniaxial Fatigue Testing of Diverse Asphalt Concrete Mixtures”, The International Society for Asphalt Pavements (ISAP), ISAP 2014, June 1–5, 2014, Raleigh, North Carolina, USA. (+)

78. George B*. Way, Krishna P. Biligiri, Kamil E. Kaloush, Jorge B. Sousa, Angelo Pinto, and Rongji Cao., “International Use and Technology of Asphalt Rubber Open Graded Friction Course Mixes”, International Journal of Pavements Conference, Sao Paulo, Brazil, 9-10 December 2013. (+)

79. Kamil E. Kaloush, “Rubberized Asphalt Mechanical Properties and Environmental Benefits Studies”. International Road Federation (IRF) 17th World Meeting, Riyadh, Saudi Arabia, November 2013.

80. Waleed Zeiada*(X), Shane Underwood, Kamil Kaloush and Michael Mamlouk. “Effect of Air Voids and Asphalt Content on Fatigue Damage Using the Viscoelastic Continuum Damage Analysis”. Transportation and Development Institute, American Society of Civil Engineers (ASCE), 2013 Airfield and Highway Pavements Conference on Sustainable and Efficient Pavements. June 2013, LA, California. (+)

81. Kamil E. Kaloush*, Jeffrey Stempihar, Mena Souliman, Krishna P. Biligiri, George Way, Mark Belshe. “Laboratory Performance Evaluation of Asphalt-Rubber Gap Graded Mixture in Puerto Rico”, Proceedings of the Asphalt Rubber 2012 Conference, ISBN:978-989-20-3255-9, Munich, Germany, 23-26 October 2012. (+)

82. George B. Way*., Kamil E. Kaloush, and Krishna P. Biligiri., “Asphalt-Rubber Standard Practice Guide – An Overview”, Proceedings of the Asphalt Rubber 2012 Conference, ISBN:978-989-20-3255-9, Munich, Germany, 23-26 October 2012. (+)

83. George B. Way*, Kamil E. Kaloush, Jorge Sousa, and Krishna P. Biligiri “Performance Characteristics of Arizona Asphalt-Rubber and Conventional Mixes using Beam Fatigue and Simple Shear Tests”, Proceedings of the Asphalt Rubber 2012 Conference, ISBN:978-989-20-3255-9, Munich, Germany, 23-26 October 2012. (+)

84. Kamil Kaloush*, Krishna Biligiri., Thorsten Nordgren, Waleed Zeiada, Maria Rodezno, Mena Souliman, Jordan Reed, Jeffery Stempihar. “Laboratory Evaluation of Asphalt-Rubber Gap Graded Mixture Constructed on Stockholm Highway in Sweden”, Proceedings of the Asphalt Rubber 2012 Conference, ISBN:978-989-20-3255-9, Munich, Germany, 23-26 October 2012. (+)

85. Waleed Zeiada*, Shane Underwood, Tina Pourshams, Jeffrey Stempihar, Kamil Kaloush. “Comparison of Conventional, Polymer, and Rubber Asphalt Mixtures Using the Viscoelastic Continuum Damage Model”, Proceedings of the Asphalt Rubber 2012 Conference, ISBN:978-989-20-3255-9, Munich, Germany, 23-26 October 2012. (+)

86. Mena I. Souliman*, Waleed A. Zeiada, Kamil E. Kaloush, and Michael S. Mamlouk, “Assessment of Different Flexure Fatigue Failure Analysis Methods to Estimate the Number of Cycles to Failure of Asphalt Mixtures”. 3rd Workshop on Four Point Bending, University of California at Davis, September 17-18, 2012. (+)

87. George B. Way*, Kamil E. Kaloush and Jorge M.B. Sousa. “Four point bending beam tests in Arizona and relationship to asphalt binder properties”. 3rd Workshop on Four Point Bending, University of California at Davis, September 17-18, 2012. (+)

88. Waleed Zeiada*, Mena Souliman, Jeffrey Stempihar, Krishna P. Biligiri1, Kamil Kaloush, Safwat Said, and Hassan Hakim. “Fatigue Resistance and Crack Propagation Evaluation of a Rubber-Modified Gap Graded Mixture in Sweden”. 7th RILEM International Conference on Cracking in Pavements, Delft, Netherlands, 20 – 22 June, Volume 4, 2012, 1359 p., 2012. (+)

89. Abdulaziz Abdallah Alossta, Waleed Abdelaziz Zeiada, Kamil Elias Kaloush*. “ Evaluation of Warm Mix Asphalt Versus Conventional Hot Mix Asphalt for Field and Laboratory Compacted Specimens”. 2nd International Warm Mix Conference, St. Louis, October 11 – 13, 2011. (+)

90. K. E. Kaloush*, M. C. Rodezno, K. P. Biligiri, G. B. Way, M. Belshe, “ Mechanistic – Empirical Pavement Design Guide Implementation and Pavement Reservation Strategies with Asphalt Rubber”. 30th Annual Southern African Transport Conference and Exhibition, SATC 2011, CSIR International Convention Centre, Pretoria, South Africa, 11-14 July 2011. (+) 91. Mena I. Souliman* and Kamil E. Kaloush. “Local Calibration of the International Roughness Index AASHTO MEPDG Model”. 5th International Conference on Bituminous Mixtures and Pavements, Thessaloniki, Greece, 1-3 June 2011. (+)

92. Biligiri, K. P.*, and Kaloush, K. E., “Laboratory Evaluation of Noise – Dampening Properties of Asphalt Mixtures”, INTER-NOISE 2010, 39th International Congress and Exposition on Noise Control Engineering, Lisbon, Portugal, 13-16 June 2010. (+)

93. Way, G. B.*, Carlson, D. D., Sousa, J. B., Kaloush, K. E., and Biligiri, K. P., “Introduction to Asphalt-Rubber Pavement Noise Reducing Characteristics”, INTER-NOISE 2010, 39th International Congress and Exposition on Noise Control Engineering, Lisbon, Portugal, 13-16 June 2010. (+)

94. Way, G. B.*, Biligiri, K. P., Kaloush, K. E., Sousa, J. B., Zareh, A., and Antunes, I., “Aging Characteristics of Neat Asphalt and Asphalt-Rubber Binders in Arizona”, European Asphalt Technology Association, EATA 2010, Parma, Italy, 2010. (+)

95. L. Mello, M*. Farias, and K. Kaloush. “Application of Continuum Damage Theory for Flexural Fatigue Tests”. 2nd Workshop on Four Point Bending, Pais (ed.), University of Minho. ISBN 978-972-8692-42-1, 2009. (+)

96. G. Way*, K. Kaloush, J. Sousa and A. Zareh. “Arizona’s 15 Years of Experience Using the Four Point Bending Beam Test”. 2nd Workshop on Four Point Bending, Pais (ed.), University of Minho. ISBN 978-972-8692-42-1, 2009. (+)

97. Carlson, J., Jo, J., Kaloush, K. E., Golden, J. S. Evaluating the Surface Energy Balance of Alternative Parking Lot Materials in Hot Dry Climates. Fourth Symposium on Policy and Socio-Economic Research and the 21st Conference on Climate Variability and Change. American Meteorological Society, 2009. (+)

98. Jordan Reed*, Krishna Biligiri, and Kamil E. Kaloush. “Evaluation of Alternative Laboratory Aging Methods of Asphalt Rubber Friction Courses”. Asphalt Rubber 2009 International Conference, Nanjing, China, ISBN 978-988-18681-1-4, November 2009. (Reed 50%, Biligiri 20%, Kaloush 30%)

99. George Way*, Kamil Kaloush, Gary Hicks, M. Stroup-Gardner, Shakir Shatnawi. “Performance of California Rubberized Asphalt Concrete High Binder Open Graded Mixes”. Asphalt Rubber 2009 International Conference, Nanjing, China, ISBN 978-988-18681-1-4, November 2009. (+)

100. Douglas D. Carlson*, George B. Way, Ali Zareh, Kamil E. Kaloush, and Krishna P. Biligiri. “Noise Characteristics and Field Performance of Five Different Wearing Courses in Arizona”. Asphalt Rubber 2009 International Conference, Nanjing, China, ISBN 978-988-18681-1-4, November 2009. (+)

101. Kamil E. Kaloush*, Thorsten Nordgren, Krishna P. Biligiri, Waleed A. Zeiada, Maria C. Rodezno, Mena I. Souliman, and Jordan Reed. “Laboratory Evaluation of Asphalt Rubber Gap Graded Mixture in Sweden”. Asphalt Rubber 2009 International Conference, Nanjing, China, ISBN 978-988-18681-1-4, November 2009. (+)

102. Kamil E. Kaloush*, Atish Nadkarni, Waleed Zeiada, Paul Burch and Christ Dimitroplos. “Asphalt Rubber Mixtures Susceptibility to Moisture Damage”. Asphalt Rubber 2009 International Conference, Nanjing, China, ISBN 978-988-18681-1-4, November 2009. (+)

103. Maria C. Rodezno* and Kamil E. Kaloush. “Implementation of Asphalt Rubber Mixes into the Mechanistic Empirical Pavement Design Guide”. Asphalt Rubber 2009 International Conference, Nanjing, China, ISBN 978-988-18681-1-4, November 2009. (+)

104. Aleksander Zborowski and Kamil E. Kaloush*. “A Fracture Energy Approach to Model the Thermal Cracking Performance of Asphalt Rubber Mixtures”. Asphalt Rubber 2009 International Conference, Nanjing, China, ISBN 978-988-18681-1-4, November 2009. (+)

105. G.B. Way*, K.E. Kaloush, J.M Sousa and A. Zareh, “Arizona’s 15 Years of Experience Using the Four Point Bending Beam Test”. 2nd Workshop on Four Point Bending, 24-25, Guimaraes, Portugal, September 2009. (+)

106. K. Kaloush*, K. Biligiri, M. Rodezno, M. Belshe, G. Way, D. Carlson and J. Sousa. “Asphalt Rubber Asphalt Concrete Friction Course Overlay as a Pavement Preservation Strategy”. The 4th International Gulf Conference on Roads, Doha, Qatar, ISBN: 978-0-415-48979-9, November 2008. (+)

107. Douglas Carlson*, George Way, Ali Zareh, Kamil Kaloush, and Krishna Biligiri. “Tire/Pavement Noise Characteristics of Wearing Course Asphalt Mixtures”. 6th International Symposium on Pavement Surface Characteristics, SURF 2008, Portoroz, Slovenia, Oct. 2008. (+)

108. Krishna Prapoorna Biligiri*, Kamil Elias Kaloush, and Jay S. Golden, “Paving Material Properties and Tire/Pavement Noise”, Asphalt – Roads for Life, Destination Copenhagen, Eurasphalt & Eurobitume, 4th Congress – E&E 2008, Copenhagen, Denmark, pp. 1214-1223, 21-23 May 2008. (+)

109. Mark Belshe*, Kamil E. Kaloush, Jay S. Golden, and Michael S. Mamlouk. “The Urban Heat Island Effect and Impact of Asphalt Rubber Friction Course Overlays on Portland Cement Concrete Pavements in the Phoenix Area”. The Challenge of Sustainability in the Geoenvironment - GeoCongress 2008, New Orleans, Louisiana, March 2008. (+)

110. G. B. Way*, K. E. Kaloush and J. B. Sousa. “Observations on Current Performance Tests and Prediction Models for Asphalt Concrete Mixes”. Proceedings of the International Conference on Advanced Characterisation of Pavement and Soil Engineering Materials, Talyor & Francis, pp 255-269, Athens, Greece, 20-22 IBSN 978-0-415-44881-9, June 2007. (+)

111. Mark Belshe*, Kamil Kaloush, and Jay Golden. “The Urban Heat Island Effect and Impact of AR-ACFC Overlays on PCC Pavements”, Asphalt Rubber 2006 International Conference, Palm Springs, California, ISBN 962-405-091-0, October 2006. (+)

112. Olga Alexandrova (X), Jonathan O. Allen, Kamil E. Kaloush*, Qinyue Sun, Maria Carolina Rodezno, and Daniel Gonzales. “Evaluation of Tire Wear Emissions, Roughness and Friction Characteristics of Asphalt Rubber Friction Course Pavements”, Asphalt Rubber 2006 International Conference, Palm Springs, California, ISBN 962-405-091-0, October 2006. (+)

113. Krishna P. Biligiri, Andres Sotil, Kamil E. Kaloush*, Jay S. Golden. “Tire/Road Noise Relationship with Viscoelastic Properties of Asphalt Mixtures”, Asphalt Rubber 2006 International Conference, Palm Springs, California, ISBN 962-405-091-0, October 2006. (+)

114. Aleksander Zborowski and Kamil E. Kaloush* “Predictive Equations to Evaluate Thermal Fracture of Asphalt Rubber Mixtures”, Asphalt Rubber 2006 International Conference, ISBN 962-405-091-0, p177-191, Palm Springs, California, ISBN 962-405-091-0, October 2006. (+)

115. R. Bhardwaj*, P.E. Phelan, J. Golden, K. Kaloush, “An Urban Energy Balance for the Phoenix, Arizona, Metropolitan Area”. Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, Chicago, Illinois. November 5-10, 2006. (+)

116. Bevan Sullivan*, Mohammad Quayum, Kamil Kaloush, Mathew Witczak; Evaluation and Challenges of the Flow Number Simple Performance Test”. 10th International Conference on Asphalt Pavements, Quebec City, Canada, August 14-17, 2006. (+)

117. Kaloush, K.*, Zborowski, A., Abojaradeh, M., Way, G., Sousa, J., “Cracking Characteristics of Asphalt Rubber Mixtures”, RILEM 5th International Conference on Cracking in Pavements, Limoges, France, May 2004. (+)

118. Kaloush, K.*, Zborowski, A., Sotil, A., Abojaradeh, M., Way G. “Material Characteristics of Asphalt Rubber Mixtures”. Asphalt Rubber 2003 International Conference, ISBN 85-903997-1-0, p129-145, Brasilia, Brazil, December 2003. (+)

119. Kaloush, K.*, Sotil, A., Way, G. “Dynamic Modulus Properties of Asphalt Rubber Mixtures”. MAIREPAV'03, Third International Symposium on Maintenance and Rehabilitation of Pavements and Technological Control, ISBN 972-8692-03-X, p339-347, University of Minho, Guimarães, Portugal, , July, 2003. (+)

120. Kaloush, K.* Witczak, M.W., and Sullivan, B. “Simple Performance Test for Permanent Deformation Evaluation of Asphalt Mixtures”. 6th International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials, PTEBM'03, ISBN 2-912143-35-7, p498-505, Zurich, Switzerland, April 2003. (+)

121. Way, G.*, Sousa, J. and Kaloush, K. “Hot Mix Asphalt Design Prediction and Field Performance, An Arizona Study”. Accepted for publications and presentation - 6th International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials, PTEBM'03, ISBN 2-912143-35-7, p543-549, Zurich, Switzerland, April 2003. (+)

122. Tashman, L.* Massad, E., Zbib H., Little, D. and Kaloush, K. “Anisotropic Viscoplastic Continuum Damage Model for Asphalt Mixes”. ASCE 15th Engineering Mechanics Division Conference, Columbia University, NY, June 2002. (+)

CONFERENCE PUBLICATIONS

1. Waleed Zeiada, Kamil Kaloush, Shane Underwood” “Cost Analysis of Fiber-Reinforced Pavements”, 2nd IRF Asia Regional Congress and Exhibition, October 16-20, Kuala Lumpur, Malaysia.

2. Kamil Kaloush, “Fiber Reinforced Asphalt Concrete: Performance Tests and Pavement Design Consideration”, 9th International Conference of Asphalt, Intercontinental Hotel, Medellín, Columbia, August 2014.

3. Mark Belshe*, Michael S. Mamlouk and Kamil E. Kaloush. “Temperature Gradient and Curling Stresses in Rigid Pavement With and Without Asphalt Friction Course Layer”. European Asphalt Technology Association, EATA 2010, Parma, Italy (Poster Presentation), June 2010. (+)

4. Kamil E. Kaloush*, Krishna P. Biligiri, Philip White, Jay S. Golden, Patrick E. Phelan, and Han-Seung Lee. “Assessment Tool to Estimate CO2 Emissions of Pavement Production and Construction”. International Conference on Sustainable Building Asia. SB10 24-26 February, 2010, Seoul, Korea. (+)

5. Patrick E. Phelan*, Kamil E. Kaloush, Jay S. Golden, Bernadette E. Phelan, Han-Seung Lee. “Urban Heat Island: Mitigation Strategies and Related Impacts”. International Conference on Sustainable Building Asia. SB10 24-26 February, 2010, Seoul, Korea. (+)

6. Kamil E. Kaloush*, Luiz de Mello, Krishna P. Biligiri, Maria C. Rodezno, and Atish A. Nadkarni. “Evaluation of Fiber Reinforcement in Hot Mix Asphalt Using Advanced Material Characterization Tests”. The First Pan American Geosynthetics Conference & Exhibition, 2-5, Cancun, Mexico, March 2008. (+)

7. Kaloush, K.*, Sousa, J. Way, G., and Galal, A., “Observations on the Development and Use of SHRP and 2002 Pavement Design Guide Performance Tests and Models for Hot Mix Asphalt Mixes”. Third Gulf Conference on Roads (TGCR06), March 6-8, 2006, Muscat, Oman. (+)

8. Kaloush, K.*, Mobasher, B. Zareh, A. Way, G., and Golden J., “Evaluation of Thin Whitetopping PCC Test Sections in Arizona”. Third Gulf Conference on Roads (TGCR06), March 6-8, 2006, Muscat, Oman. (+)

9. Way, G.*, Sousa, J. and Kaloush, K., “Asphalt Rubber Pavements In Arizona, 17 Years of Success”. Third Gulf Conference on Roads (TGCR06), March 6-8, 2006, Muscat, Oman. (+)

10. Zareh, A.*, Way, G., Sousa, J. and Kaloush, K., “Asphalt Rubber Mix Reduces Tire Pavement Noise”. Third Gulf Conference on Roads (TGCR06), March 6-8, 2006, Muscat, Oman. (+)

11. Way, G.*, Sousa, J., Kaloush, K., “Asphalt Rubber Pavement Use In Arizona, 17 Years of Success”, 4th Asia Pacific Conference on Transportation and the Environment, Xi'an International Conference Centre, China, Nov.8-10, 2005. (+)

12. Sousa, J.*, Kaloush, K., and Way, G., “General Observations on the Development of Performance Tests for Asphalt Concrete Mixes”, 12th International Flexible Pavements Conference, Melbourne, Australia, October 2003. (+)

13. Sotil, A.*, Kaloush, K. Witczak, Way, G. “Evaluacion del Caucho Asfalto Usando la Prueba del Modulo (Compleho) Dinamico E* ”. (in Spanish) First International Congress on Road Construction, Lima, Peru, October 2002. (+)

14. Sotil, A.*, Carlson, D., Way, G. and Kaloush, K. “Adicion de Caucho Vulcanizado Desechado (Llantas) en Pavimentos Treinta Anos de Experiencia en Arizona - EEUU”. (in Spanish) First International Congress on Road Construction, Lima, Peru, October 2002. (+)



POSTER PAPERS

1. Waleed Zeiada*, Shane Underwood, Kamil Kaloush, “Impact of Asphalt Concrete Fatigue Endurance Limit Definition on Pavement Performance Prediction”. Journal of Transportation Research Board, Washington, D. C. January 2015. (+)

2. Amelia Celoza (#) and Kamil Kaloush, FURI: Undergraduate Student Research Program, Ira. A. Fulton School of Engineering, “Characterization of Fiber Orientation and Distribution in Fiber Reinforced Asphalt Concrete”, Fall 2012 and Spring 2013

3. Isha Mehta (#) and Kamil Kaloush, FURI: Undergraduate Student Research Program, Ira. A. Fulton School of Engineering, “Rubber Modified Concrete Roof Tiles”, Fall 2011 and Spring 2012.

4. Colin Laughlin (#) and Kamil Kaloush, NASA Space Grant Undergraduate Research, “Thermal Properties of Commonly Used Paving Materials”, Spring 2011

5. Waleed Zeiada*, Kamil Kaloush, Krishna P. Biligiri, Jordan X. Reed, and Jeffrey Stempihar, “Significance of Confined Dynamic Modulus Laboratory Testing for Dense, Gap and Open Graded Asphalt Concrete Mixtures”, Journal of Transportation Research Board, Washington, D. C. January 2011. (+)

6. Biligiri, K. P.*, and Kaloush, K. E., “Laboratory Evaluation of Noise – Dampening Properties of Asphalt Mixtures”, INTER-NOISE 2010, 39th International Congress and Exposition on Noise Control Engineering, Lisbon, Portugal, 14 June 2010. (+)

7. Andres Sotil*, Krishna Biligiri, Kamil Kaloush and Jay Golden. “The Dynamic Complex Modulus (E*) Test as a Potential Indicator for an Asphalt Mixture’s Tire-Road Noise Characteristics”. Journal of the Transportation Research Board, Washington, D.C., 2006. (+)

8. Donna A. Hartz*, Jay Golden, Anthony Brazel, Brent Hedquist, Kamil Kaloush, “ Case Study of Thermographic Observations of Surface Materials’ Cooling Rates and Neighborhood Design in Suburban Phoenix, Arizona. Joint Poster Session: 6th Symposium on the Urban Environment and Forum on Managing Our Physical and Natural Resources. February 2006. (+)

9. Leslie Arriaga (#) and Kamil Kaloush., “Cooler Pavements, Going Towards a Sustainable World”. FURI: Undergraduate Student Research Program, Ira. A. Fulton School of Engineering, Spring 2006. – won second prize.

10. Leslie Arriaga (#) and Kamil Kaloush., “Determining Specific Heat Capacity of Paving Materials”. FURI: Undergraduate Student Research Program, Ira. A. Fulton School of Engineering, November 2005.

11. Golden, J. and K. Kaloush. SMART Materials for Thermal and Energy Benefits. AZTE Tech Expo Poster Symposium. Arizona State University, 2005. (+)


ARTICLES WRITTEN FOR NATIONAL MAGAZINES

Asphalt Pavement Magazine, January / February 2015.
“Examining the Use of Reflective Pavements to Mitigate the Urban Heat Island Effect” Chain Reaction Magazine, August 2011. “Paving the way to a cooler future”

Roads & Bridges, November 2009. “Concrete Progress: Fixing Air Holes, latest research presents methodology to prevent climate change”. (Volume: 97, Number: 11).

Roads & Bridges, November 2008. “Muscle Fiber, additives gives concrete whitetopping strength” - Concrete Progress.

TR News, Transportation Research Board of the National Academies, November-December 2007, Number 253, “Paving Materials and the Urban Climate”

Public Works, December 2005, “A Hot Night in the Big City – How to Mitigate the Urban Heat Island” INTELLECTUAL PROPERTY Pavement Management System Software

 Go back to home page.