Kamil E. Kaloush, Ph.D., P.E.
email: kaloush@asu.edu
Phone: (480) 965-5509
Fax: (480) 965-0557
Ira A. Fulton Schools of Engineering
School of Sustainable Engineering and the Built Environment
Civil, Environmental and Sustainable Engineering
PO Box 875306
Tempe, AZ 85287-5306
Leslie A. Arriaga, FURI - Fulton Undergraduate Research Initiative.
Fall 2005 - “Determining the Specific Heat Capacity and Thermal Conductivity of Paving Materials”
Spring 2006 - “Cooler Pavements, Going Towards a Sustainable World” – won second prize.
Colin Laughlin, NASA Space Grant Undergraduate Research, Spring 2011 – “Thermal Properties of Commonly Used Paving Materials”.
Isha Mehta, FURI - Fall 2011 and Spring 2012– “Rubber Modified Concrete Roof Tiles”
Colin Laughlin, Spring 2012 – “Mechanical and Thermal Properties of Concrete Mixtures with Copper Slag”.
Ryan Stevens, Spring 2012 – “Properties and Testing Methods for Pavement Striping Materials”.
1. Joseph A. Phillips, M.S. (Fall 2002) – “Implementation of the 2002 Design Flexible Pavement Design Guide For Maricopa County”., Co-Chair Witczak
2. Andres Sotil, M.S. (Spring 2003) – “Material Characterization of Asphalt Rubber Mixtures Using the Dynamic Modulus Test”, Co-Chair Witczak
3. Goutham R. Lingannagari, M.S. (December 2003) – “ Coefficient of Thermal Expansion of Concrete Materials”, Co-Chair Mobasher
4. Mohammad Ul Quayum, M.S (May 2004) – “Investigations for Using the Repeated Load Permanent Deformation Test in a Design Criteria for Asphalt Mixtures”, Co-Chair Witczak
5. Mohammad Ashraful Islam, M.S. (Fall 2005) – “Thermal Properties of Paving Materials”.
6. Krishna Biligiri, M.S., (Fall 2005) – “Improved Method to Determine Tertiary Flow Value for Asphalt Mixtures”
7. Joby Carlson, M.S. (Spring 2006). – “Quantifying the Diurnal Variability of Urban Surface Pavements in Hot Climate Region”, Co-Chair Golden.
8. Mark Belshe, (Fall 2006). – “Impact of Asphalt Rubber – Asphaltic Concrete Friction Course Overlays on Portland Cement Concrete Pavements and Urban Heat Island Effect”.
9. Atish Nadkarni (Spring 2008). – “Moisture Susceptibility of Asphalt Rubber Mixtures”.
10. Rashmi Shankar (Fall 2008). –“Analysis of Arizona Long Term Flexible Pavement Performance Test Sections”.
11. Smita Dwivedi (Spring 2009). – “Evaluation of Test Variability in Fiber-Reinforced Asphalt Concrete Mixtures Using Fiber Extraction”.
12. Jordan Reed (December 2010). – “Evaluation of the Effects of Aging on Asphalt Rubber Pavements”.
13. Bassam Ziadeh (Summer 2011). – “Finite Element Analysis on the Effects of Elastomeric Inclusions for Abating Heat Transfer in Steel Reinforced Concrete Columns”. Co-Chair with Patrick Phelan.
14. Derek Morris (Fall 2011). –“ Development of Enhanced Cylindrical Specimen Thermal Conductivity Testing Procedure”.
15. Abdulaziz Alossta (Fall 2011). – “Evaluation of Warm Mix Asphalt Versus Conventional Hot Mix Asphalt for Field and Laboratory-Compacted Specimens”.
16. Ashraf Alrajhi (Spring 2012). – “Fiber Dosage Effects in Asphalt Binders and Hot Mix Asphalt Mixtures”.
17. Tina Pourshams-Manzouri (Expected Spring 2012).
18. Ruben Lolly (Expected December 2012)
19. David Ramsey (Expected Summer 2012)
20. Samuel Enmon (Expected Spring 2013)
21. Prashant Konareddy, (Spring 2003).
22. Rama Sabat, (Spring 2006).
23. Vinay Nair, (Spring 2004)
24. Ryan Novotny, (Fall 2004)
25. Maria Carolina Rodezno, (Fall 2005).
26. Yin-Tung Tan (Fall 2006)
27. Kiran Mohanraj (Spring 2007).
28. Sharon Jesu (Fall 2007).
29. Carmen Castilleja (Spring 2011).
30. Jose Rodriguez (Fall 2011).
31. Patrick Montgomery (Spring 2012)
32. Sandra Thoms (Spring 2012)
33. Andres Sotil, Ph.D. (Fall 2005), Co-Chair Witczak, “Use of the Dynamic Modulus Test as Permanent Deformation Performance Criteria for Asphalt Pavement Systems”
34. Aleksander J. Zborowski, Ph.D. (Fall 2007). – “Development of a Modified Superpave Thermal Cracking Model for Asphalt Concrete Mixtures Based on the Fracture Energy Approach”.
35. Krishna Biligiri, (Fall 2008). – “Asphalt Mixtures’ Properties Indicative of Tire/Pavement Noise”.
36. Luiz De Mello (August 2008, degree awarded at the University of Brasilia, co-advised with Prof. Marcio Muniz De Farias, University of Brasilia, Brazil, A Teoria do Dano em Meio Continuo no Estudo da Fadiga em Misturas Asfalticas)
37. Maria Carolina Rodezno, (Spring 2010). –“Rutting Criteria for Asphalt Mixtures Based on Flow Number Analysis”.
38. Waleed Zeiada, Co-Chair Witczak, (Expected Summer 2012).
39. Jeff Stempihar (Expected December 2012).
40. Ali Fakih Co-Chair Fox, (Expected Spring 2013).
41. Atish Nadkarni (Starting Fall 2012).
1. Joel Mean-Chew Chong, M.S. April 2002. Thesis “Using Geographic Information Systems for Wastewater Pipe Condition and Capacity Assessment”.
2. Bevan William Sullivan, M.S. December 2002. Thesis “Development of Flow Number and Flow Time Candidate Simple Performance Test for Asphalt Mixtures”.
3. Yow-Shi Ho, M.S. May 2003 Thesis “ The Development of Unique Traffic Units for the Arizona Highway Network”.
4. Rimpal V. Shah, M.S. August 2003, “Economical Concrete Mix Designs for Highway Applications with A High Dosage of Flyash”.
5. Scott E. Nodes, MSE May 2003.
6. Patrick Miller, MSE August 2003.
7. Mohammad Abojaradeh, Ph.D. December 2003. Dissertation “Development of Predictive Fatigue Models for Typical Arizona Asphalt Concrete Mixes”.
8. Ali Erhan Oztemir, Ph.D. December 2003. Dissertation “Skill Driven Optimization of Construction Operations”. Del Webb School of Construction
9. Nasreen Hassan, M.S. December 2003. Thesis “ Thermal Properties of Asphalt Mixtures”.
10. Mohammed M. El-Basyouny, Ph.D. May 2004, Dissertation “Calibration and Validation of Flexible Pavement Distress Models for 2002 Design Guide”.
11. Jitendra Pahilajani, M.S. August 2004, “ Fabric-Reinforced, Cement-Based Laminated Composites: an Experimental and Theoretical Study”.
12. Jong-Suk Jung, Ph.D. December 2004, Dissertation “Analytical Procedures for Evaluating Factors that Affect PCC Pavements Performance”.
13. Javed Bari, Ph.D., “Development of a new Revised Version of the Witczak E* Predictive Models for Hot Mix Asphalt Mixtures”. December 2005.
14. Sherif Massoud Ahmad El-Badawy, Ph.D. may 2006, “ Development of a Mechanistic Constitutive Model for the Repeated Load Permanent Deformation Behavior of Subgrade Pavement Materials”.
15. Jorge Santamaria Carrera, M.S. May 2006, “Mechanical and Physical Properties of papercrete”.
16. Joo Seng Gui, M.S. August 2006, “ Impact of Pavement Thickness and Thermophysical Properties on Surface Temperatures “. Mechanical and Aerospace Engineering.
17. Pramod Tipparaju, M.S. August 2006, “Application of Value Stream Mapping in Residential Construction”. Del Webb School of Construction
18. Rahul Bhardwaj, M.S., “An Urban Energy Balance for the Phoenix, Arizona , Metropolitan Area”. Summer 2007.
19. Todd Phillip Otanicar, Ph.D. May 2009, “Direct Absorption Solar Thermal Collectors Utilizing Liquid-Nanoparticle Suspensions” Mechanical and Aerospace Engineering.
20. Yan Yang, M.S., “Development of an Asymptotic Cost Bounded Experience Curve with Application to Silicon PV Modules”. Summer 2009.
21. Tingting Ma, M.S., “Empirical Study of Simple Car-Following Model Validation and Freeway Lane-Changing Maneuver”. Summer 2009.
22. Myung Goo Jeong, Ph.D., “Implementation a Simple Performance Test Procedure in a Hot Mix Asphalt Quality Assurance Program”. Summer 2010.
23. Sarah Elia Ziems, M.S., “Stochastic Difference of Results in Traffic Microsimulation with Random Number Seed Variations”. December 2010.
24. Bhargava Sana, M.S., “Child Dependency Models in an Activity-Based Microsimulation Framework”. December 2010.
25. Carlos Carey, Ph.D. “Pore Water Pressure Response of a Soil Subjected to Traffic Loading Under Saturated and Unsaturated Conditions”. December 2011.
26. Daniel Rosenbalm, “Reliability Associated with the Estimation of Soil Resilient Modulus at Different Hierarchical Levels of Pavement Design”. December 2011.
27. Ramadan Salim, M.S., “The Effect of Environmental Location and Ground Water Table Upon The Rutting Behavior of Asphalt Airfield Pavements”. December 2011.
28. Mena Souliman, Ph.D. “Integrated Predictive Model for Healing and Fatigue Endurance Limit for Asphalt Concrete”. April 2012.
29. Karthik Konduri, “Integrated Model of the Urban Continuum with Dynamic Time-dependent Activity-Travel Microsimulation: Framework, Prototype, and Implementation”. April 2012.
30. Jin Sung Cho, Ph.D., “Analysis of Buried Pipeline Behavior in Open Trench and Dirctionally Drilled Installations”. December 2012.
Go back to home page.